← View all Startech Networks Inc careers

Startech Networks Inc

Structured Cabling Technician – Lead Installer

Midland, Texas•Contract
Apply
About the Job
Title-Structured Cabling Technician – Lead Installer 
Job type-Contract-to-Hire | On-Site |
Hyperscale Data Center Build 

About Startech Networks:
Startech Networks Inc. (STN) is a network infrastructure services provider specializing in hyperscale data center deployment. We deliver structured cabling, rack & stack, and complete network build-outs for major hyperscale operators and their prime contractors, and we operate large field crews across greenfield, colocation, and campus environments. 

Role Overview:
Startech is hiring approximately experienced Structured Cabling Technicians to join our current hyperscale data center build. This is a hands-on installer role for candidates with a full lead-installer skill set — capable of executing every phase of the install from cable reel setup through final dressing, with minimal supervision. You will work in 2-person crews on high-density fiber trunk pulls (MPO, LC), copper Ethernet runs, and rack & stack activities. 

Engagement Type:
This is a contract-to-hire engagement. The role begins as a contract assignment on our current data center build project. Based on performance — quality of work, safety record, reliability, teamwork, and leadership — top performers will be offered full-time permanent positions with Startech Networks and rolled into our ongoing hyperscale project pipeline. Compensation, benefits, and direct-hire terms are discussed with candidates who advance through the initial contract phase. 

Key Responsibilities:
  • Set up cable jacks and reels for MPO, LC, and copper Ethernet cable pulls, including large-diameter reels for 144F and 288F trunks. 
  • Execute overhead cable pulls through ladder rack, cable tray, sleeves, and pass-throughs; manage bend radius, pulling tension, and slack loops per manufacturer spec. 
  • Operate scissor lifts and rolling scaffolds safely at 12–15 ft ceiling heights; complete overhead dressing and cable management with proper Velcro and hook-and-loop strapping. 
  • Install and route cable through pass-through sleeves between rooms, verifying fire-stop and grommet integrity where applicable. 
  • Perform patch and label work on both cable ends — MPO and LC termination, connector cleaning (Sticklers, US Conec, Fluke Quick Clean), inspection, and full labeling to project spec. 
  • Handle Cat6 / Cat6A UTP Ethernet installations including cable pulls, jack termination, and Cat6/6A certification hand-off. 
  • Assist rack & stack activities — cabinet roll-in, leveling, PDU installation, ground bond, and initial cable management inside the rack. 
  • Maintain a clean, organized, and safe work zone; follow all daily JHAs and toolbox talks. 
  • Interface with test technicians to hand off cable segments for Tier 1 acceptance; support troubleshooting of failed connectors. 
  • Mentor junior installers on proper technique, tool handling, and quality standards. 
  • Maintain assigned tools and consumables; escalate reorder needs to the foreman. 

Required Qualifications:
  • Minimum 3 years of hands-on structured cabling experience with progressively increasing responsibility. 
  • Demonstrated lead-installer capability: able to execute a full install package (pull, route, terminate, label, dress) with minimal supervision. 
  • Hands-on experience with cable reel handling and jack setup for medium and large fiber trunks. 
  • Certified for scissor lift and aerial lift operation (OSHA-compliant training documentation required). 
  • OSHA 10 certification (OSHA 30 preferred). 
  • Experience with pass-through installations, fire-stop coordination, and cable tray/ladder rack routing. 
  • Working knowledge of MPO and LC connector types, cleaning tools, and inspection scopes. 
  • Ability to read cable schedules, elevation drawings, port maps, and BOM documentation. 
  • Physical ability to lift 50 lbs repeatedly, climb ladders and lifts, and work overhead for extended periods. 
  • Reliable transportation to site and consistent attendance record. 
  • Valid driver's license. 

Preferred Qualifications:
  • BICSI Installer 1 (INST1) or Installer 2 – Copper (INST2-C) certification. 
  • Prior hyperscale data center project experience.
  • Familiarity with structured cabling standards (TIA-568, TIA-942). 
  • Experience with fiber cleaning and inspection tools (Sticklers CleanClicker, Fluke Fiber Inspection Scope, Viavi FBP). 
  • Comfortable using test equipment for basic continuity checks (VFL, OLTS). 
  • Bilingual (English/Spanish) a plus. 

Physical Requirements:
  • Ability to lift up to 50 lbs repeatedly throughout the shift. 
  • Extended standing, walking, climbing ladders and scissor lifts, and working overhead at 12–15 ft heights. 
  • Manual dexterity for connector work in tight spaces (behind racks, in overhead trays). 
  • Ability to work extended shifts (up to 10 hours) in a temperature-controlled but active data center environment. 
  • Ability to wear required PPE including hard hat, safety glasses, hi-vis vest, and fall protection harness. 

Apply